SAP CO Interview Question and Answer

Part 1 :

CONTROLLING

Controlling: Controlling provides you with information for management decision-making. If facilitates co-ordination, monitoring and optimization of all process in an organization.

Features of Controlling: Cost Center Accounting, Activity Based Accounting, Internal Orders, Product Costing, & Profitability Analysis.

Controlling Area: Organization unit that represents a closed system Used for accounting purposes.

You can assign one or more company codes to one controlling area.

If you assign more than one company code to one controlling area, then you need to note the following.

1) Consistent Chart of a/c’s (Treat each cost element in all company codes in same way).
2) The Operative fiscal year variants in the company codes must match the fiscal year variant in controlling area.
3) You should execute period end closing in controlling for all company codes at same time.
4) The system only post reconciliation posting across company codes without taxes, which means that it cannot automatically create invoice.
5) Maintain controlling area – OKKP .
6) Maintain no. ranges for controlling documents – KANK
7) Maintain versions – OKEQ 

COST ELEMENT ACCOUNTING

Cost Elements:  Cost Elements Describe the origin of costs. Cost element classifies the organization valuated consumption of production factors within a controlling area.

Primary Cost Elements: These arise through the consumption of productions factors that are sourced externally. Primary cost elements are used for direct posting and must be accompanied in GL a/c’s in FI.

T-code : KA02 : The categories are follows 1) General primary cost element, 03 – Imputed cost element percentage method 4 – Imputed cost element, target = Actual Method, 11- Revenue elements, & 12 – sales deductions.

Secondary Cost Elements: Cost elements arise through the consumption of production factor’s that are provided internally i.e., by enterprise itself. Secondary cost elements are used strictly for internal controlling posting like assessments and settlements. T-code – ka06

Category: 12 – internal settlements, 31 – Result analyses, 41 – overhead’s, 42 – assessments etc. Cost Element Group – kah1 

COST CENTER’S

Cost Center’s: Organizational Unit within a controlling area that represents a defined location of cost incurrence. The definition can be based on 1) Functional Requirement, 2) Allocation criteria, 3) Physical location and 4) Responsibilities for cost.

Change Cost center hierarchy – OKEON
Creation of Cost Center – KS01

Distribution: Was created to transfer primary costs from a sender cost center to receiving controlling objects. Distribution is primary cost elements.
Define Distribution – KSV1
Execute “” – KSV5

Assessment: Was created to transfer primary and secondary costs from a sender cost center to receiving controlling objects.
During assessment, the original cost elements are summarized into assessment cost elements (secondary cost element, category=42).

Define Assessment – KSU1
Execute Assessment – KSU5

Activity Types: Categorizes productions and services activities provided by a cost center to the organization and used for allocating costs for internal activities to the originates of the costs.

Creation of Allocation Cost elements – KA06
Creating/Maintaining the Activity types – KL01

Statistical key figures: Are used as the basis (tracing factor) on which to make allocations (assessments & distributions) and to analyze structural key figures.

Q1. Explain ‘controlling (co)’ In Sap?

Ans: SAP calls managerial accounting ‘Controlling’ and the module is commonly known as ‘CO.’ The CO module is, thus, primarily oriented towards managing and reporting cost/revenue and is mainly used in ‘internal’ decision-making. As with any other module, this module also has configuration set-up and application functionality.

The controlling module focuses on internal users and helps management by providing reports on cost centers, profit centers, contribution margins and profitability, etc.

Q2. What Are The Important ‘organizational Elements Of Co’?

Ans: The important organizational structure of controlling includes:

Operating Concern (the top-most reporting level for profitability analysis and sales and marketing controlling).

Controlling Area (central organization in ‘controlling,’ structuring internal accounting operations).

Cost Centers (lower-most organizational units where costs are incurred and transferred).

Q3. What Is A ‘controlling Area’? How Is It Related To A Company Code?

Ans: A ‘Controlling Area’ is the central organizational structure in ‘controlling’ (CO) and is used in cost accounting. The controlling area, as in the case of a Company Code, is a self-contained cost accounting entity for internal reporting purposes. The controlling area is assigned to one or more Company Codes to ensure that the necessary transactions, posted in FI, are transferred to controlling for cost accounting processing.

One controlling area can be assigned one or more Company Codes.

One chart of accounts can be assigned to one or more controlling areas.

One or more controlling areas can be assigned to an operating concern.

One Client can have one or more controlling areas.

Q4. Outline ‘company Code—controlling Area’ Assignments.?

Ans: There are two types of assignments possible between the Company Code and a controlling area:

One-to-one: Here, one Company Code corresponds to one controlling area.

Many-to-one: More than one Company Code is assigned to a single controlling area.

Q5. What Are The ‘components Of Controlling’?

Ans: There are eight major submodules in CO and each of these submodules has many components as detailed below:

1. Cost Element Accounting
2. Cost Controlling
3. Cost Center Accounting
4. Internal Orders
5. Activity-Based Costing
6. Product Cost Controlling
7. Profitability Analysis
8. Profit Center Accounting

Q6. Why Do You Need ‘cost Element Accounting’?

Ans: Cost Element Accounting’ (CO-OM-CEL) helps you to classify costs/revenues posted to CO. It also provides you the ability to reconcile the costs between FI and CO. CO-OM-CEL provides the structure for assignment of CO data in the form of cost/revenue carriers called cost elements or revenue elements.

Q7. Explain ‘cost Center Accounting.’?

Ans: Cost Center Accounting’ deals with the difficult task of managing ‘overheads’ within your organization. Since overhead costs are something that you cannot directly associate with a product or service, which can be difficult to control, cost center accounting provides you with the necessary tools to achieve this.

Q8.What Is ‘activity-based Costing’?

Ans: Activity-Based Costing,’ popularly known as ABC, helps you to view overhead costs from the point of business processes. The result is you will be able to optimize costs for the entire business process. As a single business process, activity-based costing will cut across several cost centers and will give you an enhanced view of the costs incurred.

Q9.What Is ‘product Cost Controlling’ (co-pc)?

Ans: Product Cost Controlling’ (CO-PC) deals with estimating the costs to produce a product/service. CO-PC is divided into two major areas:

1. Cost of materials
2. Cost of processing

With CO-PC, you can calculate:

1. Cost of goods manufactured (COGM)
2. Cost of goods sold (COGS)

CO-PC is tightly integrated with Production Planning (PP) and Materials Management (MM), in addition to FI. The functionality helps to:

• Calculate Standard Costs of manufactured goods
• Calculate the Work-in-Progress (WIP)
• Calculate the Variances, at period-end
• Finalize settlement of product costs

Note that CO-PC deals only with production costs as it deals only with the production.

Q10. What Is ‘profitability Analysis’ (co-pa)?

Ans: ‘Profitability Analysis’ (CO-PA) helps you determine how profitable (denoted by the ‘contribution margin’) your market segments are. The analysis is on the external side of the market. You will be able to define what segments, such as customer, product, geography, sales organization, etc., of the market are required for analyzing ‘operating results/profits.’ With multi-dimensional ‘drill-down’ capability, you have all the flexibility you need for reporting.

[teaserbox type=”4″ img=”2905″ title=”Interested in Learning Data Science” subtitle=”Join us Now!” link_url=”http://www.mytectra.com/data-science-training-in-bangalore.html” target=”blank”]

Q11. How Is ‘profit Center Accounting’ (ec-pca) Different From Co-pa?

Ans: Unlike CO-PA where the focus is on external market segments’ profitability, ‘Profit Center Accounting’ (EC-PCA) focuses on profitability of internal areas (profit centers) of the enterprise. Profit center accounting is used to draw internal balance sheets and profit & loss statements. You may use EC-PCA in place of business area accounting.

Both CO-PA and EC-PCA serve different purposes, and are not mutually exclusive. You may need them both in your organization.

Q12. Explain ‘integration Of Co’ With Its Components And Other Sap Modules.?

The CO module is integrated with FI, AA, SD, MM, PP, and HR:

Ans: FI is the main source of data for CO. All expenses, posted in FI, flow to CO through the ‘primary cost elements’ to the appropriate ‘cost centers.’ Similarly, postings in Asset Accounting (such as depreciations) are also passed on to CO.

Revenue postings in FI would result in postings in CO-PA and also in EC-PCA.

The SD, MM, and PP modules have many integration points in CO. Goods issue (GI) to a controlling object or goods receipt (GR) from a ‘production order’ are some examples of integration. These modules are tightly integrated as consumption activities, cost of goods issued, overhead charges, material costs, etc., which are passed on to production objects such as PP production order or sales order. The WIP (Work-in-Progress) and the variances, at period ends, are settled to CO-PA, CO-PCA, and also to FI. Revenues are directly posted when you generate billing documents in SD, if the sales order is a cost object item.

The HR module generates various types of costs to be posted in CO. Planned HR costs can also be passed on for CO planning.

Q13. What Is A ‘cost Object’?

Ans: A ‘Cost Object,’ also known as a CO Account Assignment Object, in SAP denotes a unit to which you can assign objects. It is something like a repository in which you collect costs, and, if necessary, move the costs from one object to another. All the components of CO have their own cost objects such as cost centers, internal orders, etc.

The cost objects decide the nature of postings as to whether they are real postings or statistical postings. All the objects that are identified as statistical postings are not considered cost objects (for example, profit centers).

Q14. Differentiate Between ‘real’ And ‘statistical Postings’ In Co.?

Ans: The CO account assignment objects decide the type of postings allowed. They can be real or statistical postings.

‘Real Postings’ allow you to further allocate/settle those costs to any other cost object in CO, either as ‘senders’ or as ‘receivers.’ The objects that are allowed to have real postings include:

• Cost Centers
• Internal Orders (Real)
• Projects (Real)
• Networks
• Profitability Segments
• PP—Production Orders (make-to-order)

‘Statistical Postings,’ on the other hand, are only for information purposes. You will not be able to further allocate/settle these statistical costs to other cost objects. Examples of such objects include:

• Statistical (Internal) Orders
• Statistical Projects
• Profit Centers

Q15. How Do You Define ‘number Ranges’ In Co?

Ans: You will be required to define, for each of the controlling areas, the ‘Number Ranges’ for all transactions that will generate documents in CO. Once done for a controlling area, you may copy from one controlling area to other controlling areas when you have more than one such area.

To avoid too many documents, SAP recommends grouping multiple but similar transactions, and then assigning number ranges to this group. Further, you may create different number ranges for plan and actual data. As in FI, the number ranges can be internal or external. The document number ranges in CO are independent of fiscal years.

Q16.How Does ‘master Data’ Differ From ‘transaction Data’ In Co?

Ans: The ‘Master Data’ remain unchanged over a long period, whereas ‘Transaction Data’ are short-term. The transaction data are assigned to the master data.

Though you normally create the master data from transactions, note that you will be able to create these records from the configuration side as well. When you need to create a large number of master data, you may use the ‘collective processing’ option to create related master records in one step. SAP puts master data in ‘groups’ for easy maintenance.

In the case of master data of cost center/cost elements/activity types, once they are created, you will not be able to change the date. SAP calls this feature the ‘time dependency’ of master data. If necessary, you can extend the ‘time’ by creating a new one and attaching it to the existing objects. In the case of resources, the master data are time-dependent and the system will allow you to delete these objects. Statistical Key Figures (SKF) are not time-dependent; once defined they are available in the system forever.

Q17.What Is A ‘cost Element’?

Ans: ‘Cost Elements’ represent the origin of costs. There are two types of cost elements:

Primary Cost Elements

Secondary Cost Elements

Q18.What Is A ‘primary Cost Element’?

Ans: Primary Cost Elements’ represent the consumption of production factors such as raw materials, human resources, utilities, etc. Primary cost elements have their corresponding GL accounts in FI. All the expense/revenue accounts in FI correspond to the primary cost elements in CO. Before you can create the primary cost elements in CO, you first need to create them in FI as GL accounts.

Note that SAP treats revenue elements also as primary cost elements in CO processing. The only difference is that all the revenue elements are identified with a negative sign while posting in CO. The revenue elements correspond to the revenue accounts in FI and they fall under the cost element category, category 01/11.

Q19. What Is A ‘secondary Cost Element’?

Ans: Secondary Cost Elements’ represent the consumption of production factors provided internally by the enterprise itself, and are present only in the CO. They are actually like cost carriers, and are used in allocations and settlements in CO. While creating these elements, you need to mention the cost element category, which can be any of the following:

Category 21, used in internal settlements

Category 42, used in assessments

Category 43, used in internal activity allocation

Q20. What Is A ‘cost Element Category’?

Ans: All the cost elements need to be assigned to a ‘Cost Element Category,’ to determine the transactions for which you can use the cost elements.

Example:

Category 01, known as the ‘general primary cost elements,’ is used in standard primary postings from FI or MM into CO.

Category 22 is used to settle order/project costs, or cost object costs to objects outside of CO (such as assets, materials, GL accounts, etc.).

[teaserbox type=”4″ img=”2904″ title=”Interested in Learning Machine Learning!” subtitle=”Join Us!” link_url=”http://www.mytectra.com/machine-learning-training-in-bangalore.html” target=”blank”]

Q21. How Do You Automatically Create ‘cost Elements’?

Ans: You will be able to create ‘cost elements’ automatically by specifying the cost element, the cost element interval, and the cost element category for the cost elements. All these are achieved by creating default settings. The creation of cost elements is done in the background.

The primary cost elements can be created only when you have the corresponding GL accounts in the chart of accounts of the Company Code. Even though the GL account names are used as the names of the primary cost elements thus created by the system, you have the option of changing these names in CO. All the secondary cost elements are created in CO; the name of these cost elements comes from the cost element category.

Q22. Explain ‘segments’ And ‘cycles.’?

Ans: A ‘Segment’ is one processing unit required to complete an automated allocation of distribution or assessment or reposting of planned/actual costs in controlling in SAP. A segment is made up of (a) allocation characteristics—to identify the sender/receiver, (b) values of the sender—plan/actual, type of costs to be allocated, and (c) values of the receiver—the basis for allocation, for example, the tracing factor such as SKF, percentages, etc.

When you combine multiple segments into a single process, then you call that the ‘Cycle.’ A Cycle helps you to process various segments in a chain-like fashion one after another. A Cycle consists of header data (valid for all Segments in a Cycle) and one or more Segments, with summarized rules and settings enabling allocation. The Segments within a ‘cycle’ can be processed iteratively (one segment waits for the results of another) or non-iteratively (all the segments are processed independently) or cumulatively (to take care of variations in receiver Tracing Factors or sender amounts).

Typically, when you start the cycles you will start them in a ‘test’ mode to see the allocations before actual postings. Technically, you can run the cycles in ‘production’ mode at any point of time, but the system will carry out the allocation postings only on the first day of a period. The utility of the cycle lies in the fact that you can run these period after period.

Q23. What Is ‘iterative Processing’ Of Cycles?

Ans: ‘Iterative Processing’ is nothing but the repetitive processing of sender/receiver relationships until the sender’s entire cost is transferred to the receiver(s). During iterative processing, you will not be able to use ‘fixed amounts’ as the ‘sender rules’; you will also not be able to define a percentage to remain on the sender. You will be able to use both plan and actual data while using the iteration.

Q24. What Is ‘splitting’? Explain The ‘splitting Structure.’?

Ans: ‘Splitting’ is a process used to assign ‘activity-independent’ plans/actual costs, both primary and secondary, of a cost center to the individual activity types within that cost center. But the important requirement is that you will use this when there is no account assignment to the activity types.

You may either use the Splitting rules or the Equivalence number to achieve this. When you split the costs from a cost center, the cost center temporarily becomes more than one cost center for the purpose of allocation but again becomes a single cost center when posting happens in the subsequent period.

If you need to assign different cost elements or cost element groups to activities in more than one way, then you need to define a ‘Splitting Structure’ containing ‘splitting rules’ to determine the criteria of splitting ‘activity-independent’ costs to an activity type. If you have created the splitting structure in customizing and assigned the same to a cost center, then the system uses the splitting structure for cost apportioning; otherwise, it will use the equivalence number.

The ‘splitting rules’ determine the amount or the proportion of costs to be allocated to various activity types of a cost center and is based on the consumption of these activity types. The costs thus allocated may be a fixed sum, or a percentage, or it can even be based on the tracing factors or SKFs.

The ‘equivalence number’ is a basic method for splitting the costs when you manually plan for each of the activity types. By this, you will plan all activity-independent costs according to the equivalence numbers (the default is 1).

Q25. What Is An ‘activity Price Calculation’?

Ans: You will be completing the planning process only when you perform the ‘Activity Price Calculation,’ which is based on planned activities and costs. By doing this you are evaluating the planned secondary costs at receiving cost centers. If you do not want to use activity price thus calculated, you are free to use the political price for the activity type.

As you are aware, the activity price is used for planned/actual allocation and is determined by using either the political price or the system-calculated activity price.

Q26.What Is Known As The ‘political Price’ For An Activity Type?

Ans: The ‘Political Price’ is the price determined outside the SAP system, which is used in manual input using the required planning layout in planning.

Q27: What Is ‘allocation Price Variance?

‘Ans: Allocation Price Variance’ is the difference between the ‘political price’ of an activity type and the ‘system calculated activity price’ of the same activity type.

Q28. What Is ‘budgeting’?

Ans: ‘Budgeting’ is used to augment the planning process at the cost-center level. While planning is considered the ‘bottom-up’ approach, budgeting is regarded as the ‘top-down’ method to control costs.

Budgeting usually comes ‘down’ from the ‘top (management)’ and is used to guide the planning process at the cost-center level. Note that budgeting is not integrated with postings; you will get an error when the system comes across a posting that will result in the actual values exceeding the budget for that cost center.

Q29. What Are The ‘direct Allocation’ Methods Of Posting In Co?

Ans: The ‘Direct Allocation’ of posting in CO may be an actual cost entry or a transaction-based posting.

The actual cost entry is the transfer of primary costs from FI to CO, on a real-time basis, through the primary cost elements. You may also transfer transaction data by making the cost accounting assignment to cost objects from other modules such as FI-AA, SD, and MM:

FI-AA: Assign assets to a cost center (to post depreciation, etc.)

MM: Assign GR to a cost center/internal order

SD: Assign or settle a sales order to a cost center or internal order

Note that during actual cost entry, the system creates two documents. When you post the primary costs from FI to CO, the system will create a document in FI and a parallel document in CO, which is summarized from the point of the cost object/element.

Transaction-based postings are executed within the CO, again on a real-time basis, enabling you to have updated cost information on the cost centers at any point in time. You will be able to carry out the following transaction-based postings in CO:

Reposting

Line items

Transactions

Manual cost allocation

Direct activity allocation

Posting of Statistical Key Figures

Posting of sender activities

1. What Is The ‘indirect Allocation’ Method Of Postings In Co?

The ‘Indirect Allocation’ of postings in CO may be used at the end of a period as a periodic allocation. This is done after you have completed all the primary postings. You may post the following periodic allocations using indirect allocation:

Periodic Reposting

Distribution

Assessment

Accrual Cost Calculation (Inputted Cost Calculation)

Indirect Activity Allocation

Q30. Explain ‘co Automatic Account Assignment.’?

Ans: For transferring primary costs to CO, on a real-time basis, you need to have ‘Automatic Account Assignments’ defined in the system. By doing this, you will always be able to post a particular cost to a specified cost center. You can also use this assignment for automatically posting the exchange rate differences (gain or loss), discount, etc., to CO.

You may also have additional account assignment at different levels such as:

Controlling area/account/Company Code in the customizing

Controlling area/account/cost element in the master record

Controlling area/account/Company Code/business area/valuation area in customizing

The system always goes through the route of customizing first, then to the cost element master record while accessing the account assignment rules.

Q31.How Does ‘validation’ Differ From ‘substitution’?

Ans: SAP uses validations and substitutions to check the integrity of data entered before posting a document. When you have both substitutions and validations defined, the system first completes the substitution then goes on to validate the entries. Note that only one validation and one substitution can be activated at a time for a controlling area per ‘call-up point.’

A ‘Validation’ uses Boolean logic for checking any type of combination of specified criteria (such as account type/cost center combination) for ensuring the validity before allowing you to post a document.

Example:

Validation Rule: If the cost element is ‘120000,’ then the cost center is ‘1200.’

Document: You try posting a document containing the cost element as ‘120000’ and the cost center is ‘1400.’

System Response: The system will throw an ‘error message’ after checking that the cost center value does not match the cost center value of the criteria for that given cost element value.

In contrast to validation which just checks for validity, substitution ensures that the system replaces a value assigned to one or more fields based on predetermined criteria, using, again, ‘Boolean logic.’

Example:

Substitution Rule: If the cost element is ‘120000,’ then the cost center is ‘1200.’

Document: You try posting a document containing the cost element as ‘120000’ and the cost center as ‘1400.’

System Response: The system will replace the entered cost center value of ‘1400’ with that of the correct value ‘1200.’

Q32. What Is A ‘call-up Point’?

Ans: A ‘Call-up Point’ is a particular point in transaction processing that triggers an action such as substitution or validation.

Q33. What Is ‘boolean Logic’?

Ans: Boolean Logic’ is based on simple logic to determine if a given statement is true or false. The logic works on the basic principle that a statement can either be true or false. In a complex statement (created using operators ‘and’/‘or’/‘nor,’ etc.) with many parts, the logic goes by assigning true or false from part to part, and then determines at the end whether the combination is true or false.

Q34. Explain ‘reposting’ In Cost Center Accounting.?

Ans: ‘Reposting’ is one of the ‘transaction-based postings’ in Cost Center Accounting used to reallocate costs that were incorrectly posted to another cost center earlier. Also called internal reposting, there are two types:

Line Item Reposting

Transaction Reposting

Use Line Item Reposting only when a certain line item, from the original posting, needs to be reposted. Under this reposting, at the end of the transaction, the system creates a new CO document, but keeps the original FI document unchanged. In the new CO document created, the original FI number is referenced.

You will resort to the entire Transaction Reposting when the original posting was incorrect. Here, the original FI documents are not referenced to in the new CO document created, though the original FI document remains unchanged.

Q35. Is ‘periodic Reposting’ Different From ‘reposting’?

Ans: ‘Periodic Reposting,’ a method under ‘indirect allocation,’ is used to correct multiple postings made to cost centers during a particular period. As such, this is similar to multiple reposting under ‘transaction-based postings.’

Periodic reposting is also similar to distribution, when you use this, at the period end, to transfer all costs from a ‘pooled cost center’ to other receivers. (Note that the ‘distribution’ is meant primarily for cost allocation, but periodic reposting is meant for correcting the posting errors.)

Q36.Explain ‘manual Cost Allocation.’?

Ans: ‘Manual Cost Allocation’one of the ‘transaction-based postings’ is used to post both primary and secondary actual costs (not the planned costs), and also to transfer external data. You may also use this to correct secondary costs that were incorrectly posted earlier. In the process of manual cost allocation, remember that you can use any type of cost element except 43, as this is meant exclusively for activity allocation.

You may use this among cost centers, internal orders, networks, network activities, sales orders, sales order items, WBS elements, etc., identifying these cost objects as senders/receivers.

Q37. What Is ‘direct Activity Allocation’?

Ans: Direct Activity Allocation’—one of the ‘transaction-based postings’—is used to record activities performed by a cost center and to allocate simultaneously to ‘receiving cost centers.’ You will use this ‘direct activity allocation’ only when you know the activity volumes of both the sender and the receiver. If not known, then use the indirect activity allocation at the period end.

You need to input the activity quantity, sender/receiver cost center and date to enable the system to allocate the costs; the system will automatically determine the allocation cost element and the activity price (either the planned price or the actual price). The system multiplies the activity consumed with that of the activity price to arrive at the allocated cost.

Q38. How Do You Calculate ‘accrued Costs’?

Ans: SAP provides two methods for calculating the Inputted or Accrued Costs in CO:

Target=Actual method

Cost Element Percent method

Q39. Describe The ‘reconciliation Ledger.’?

Ans: The ‘Reconciliation Ledger’ is used to keep track of all cross-Company Code transactions between FI and CO, as there is every chance that there may be some imbalance between the CO totals and FI totals when more than one Company Code is attached to a controlling area. This is because you may try to allocate costs from one cost center to another assigned to a different Company Code.

The reconciliation ledger records the Company Code, business area, functional area, amount, cost objects, cost element, currency (Company Code and controlling area), etc. You can make reconciliation postings at the end of a period to synchronize FI and CO with the configuration settings to automatically post the differences to FI.

While configuring the reconciliation ledger, you may use extended account assignments besides the normal account assignment for automatic transfer of reconciled postings. The extended account assignment helps make more comprehensive assignments to the relevant reconciliation accounts, with the option and flexibility of specifying any field in the reconciliation ledger (Company Code, cost element, functional area, etc.) for checking the ‘substitution rules.’

To aid in determining possible reconciliation postings, you can opt for selecting individual cost flows from all the relevant cost flows. This is accomplished by running the relevant report and looking for the relevant ‘data block’ (such as total cost flows, basic overview list, and detailed list).

Q40. What Is ‘variance Analysis’ In Co-om-cca?

Ans: ‘Variance Analysis’ is the determination and interpretation of the difference(s) between the actual and planned (target) costs (within a cost center/cost center group) in cost center accounting. The analysis is intended to provide important clues to top management to plan better later.

Q41. What Are The ‘categories Of Variances’ In Co-om-cca?

SAP helps to classify all variances into two categories:

Ans:

Input Variance

Output Variance

Q42. Explain The ‘input Variance.’?

Ans: The ‘Input Variance’ is the result of the mismatch of amounts/quantities of inputs planned and actually used. You will be able to identify the following input side variances in the system:

Quantity Variance: when there is a difference between planned and actual quantity of activity consumption. The inference is that there is some production inefficiency leading to more consumption or there is some loss/shrinkage in the quantities.

Price Variance: when there is a difference between the planned and actual price of an activity. The inference will be that you may need to change the suppliers looking for lower prices or it is just a market condition.

Resource (use) Variance: when there is use of an unplanned cost element or there has not been a posting of a planned cost element. The inference is that there are some unidentified costs that may be planned in the next planning cycle, or just plain errors in postings.

Remaining (input) Variance: these are all miscellaneous variances where the system is not able to categorize a variance.

Q43. What Is An ‘output Variance’?

Ans: An ‘Output Variance’ is the result when the actual costs allocated from a cost center differ from the planned (or target) cost allocation from the cost center. The variances on the ‘output side’ may be any one of the following:

Volume Variance: This variance occurs with actual and planned activities (in terms of activity quantity and/or the activity itself).

Output Price Variance: This variance occurs when the activity price used in the actual allocation is a political activity price (manually entered or plan price) differing from the system calculated activity price (target price).

Output Quantity Variance: This kind of variance occurs only on the actual side, when there is a difference between the actual activity quantity (manually) entered in the sender cost center, and the actual activity quantity allocated from that sender cost center.

Remaining Variance: This reflects the miscellaneous variance, at the cost center level, identified by the system on the output side but remains not categorized into any of the above three types. The possible reason can be that you have deactivated the output variances in the variance variant configuration or the output variance is less than the ‘minor difference’ you have defined in the ‘variance variant.’

Q44. How Do You Deal With ‘variances’?

Ans: Though the system identifies and calculates variances, they are not automatically dealt with by the system. Hence, these variances will remain at the cost center as a period-end balance and you need to act on that in one of the following ways:

You may do actual activity price calculation to revalue all internal allocations with a newly calculated price (as against the initial planned activity price), and post the difference to all the cost centers which initially received the allocations. This will help you in clearing all or a portion of output price variances.

You may ‘transfer’ the variance balance to other modules (such as CO-PA) for further analysis.

You may make additional automated allocations within CO-OM-CCA to one or more cost center

Q45.What Are All The ‘standard Reports’ In Co?

Ans: SAP comes delivered with a number of ‘Standard Reports’ in the CO module. The reports are grouped under:

Planning reports

Comparison reports

Line item reports

Report for activity prices

Reports for variance analysis

Master data reports

Document display

All the reports are arranged in a ‘report tree’ with a hierarchical arrangement of reports under various nodes. Note that you will not be able to change the standard report tree supplied by SAP; if you need to you can copy it, define your own reports, and then attach these newly defined ones to the new report tree you just defined.

Q46. What Is ‘summarization’ In Co?

Ans: ‘Summarization’ helps to condense and store the transaction data at the ‘cost center group’ level. You may do the summarization for the highest node of the standard hierarchy or any of the ‘alternate hierarchies.’ Once summarized, you will be able to create a vast number of reports with report run-time vastly reduced as all the data of the nodes are readily available from the summarized table.

Q47. What Is A ‘plan Version’?

Ans: A ‘Plan Version’ is a collection of planning data. The version controls whether the user will maintain plan data or actual data or both. You may create as many versions as you need, though SAP provides you with the necessary versions in the standard system.

Each version has information stored in the system per fiscal year period. The version ‘000’ is automatically created for a period horizon of five years, and is normally the final version as this allows for storing actual information as well. You will be using the data in version ‘000′ for all the planned activity price calculation. Once planning is completed, you need to ‘lock’ that version so that no one will be able to modify the plan data.

Q48. What Is ‘integrated Planning’ In Co-om-cca?

Ans: ‘Integrated Planning’ helps you to transfer data from other SAP modules such as PP, HR, FI-AA, etc. If you have planned data in these modules and just transfer these into CO, without making any changes, then you do not need plan again in cost center accounting. Before using integrated planning, you need to activate the integration in the planning menu.

Note that integrated planning is possible only when there has been no data planned on that version before activating the integrated planning.

Q49. Explain ‘plan Layout.’?

Ans: A ‘Plan Layout’ is nothing but a data entry screen or template that you use to input plan data.

In most situations, it would be more than sufficient to use SAP supplied planning layouts; however, you may create your own by copying one of the existing layouts and altering it with the help of report painter. While creating a custom layout, note that you have the flexibility to create up to nine lead columns (giving the details the nature of the data associated with the value columns), and any number of value columns (plan data such as amount, unit, etc., corresponding to the lead column).

You also have the option of using MS-Excel spreadsheets as the data input screen in lieu of the SAP plan layouts; but to achieve this you need to activate the ‘integrating with Excel option’ while assigning the layout(s) to a planner profile in IMG.

You need to define a plan layout for each of the three planning areas in CO, namely:

1. Primary Cost and Activity Inputs
2. Activity Output/Prices
3. Statistical Key Figures

Q50. Explain A ‘plan Profile.’?

Ans: A ‘Plan Profile’ (or Planning Profile) helps in controlling the whole process of planning by logically grouping the various plan layouts together. It determines the timeline for planning. You can have more than one planning layout per plan profile.

Before you actually start inputting the data, you need to set the plan profile so that the system knows what layout needs to be used for the planning exercise.

Q51. How Do You Copy ‘plan Data’ From One Period To Another?

Ans: SAP allows you to copy planning data, created manually earlier, from one fiscal year to the other or from one period to a different period within the same fiscal year. You have the option of copying existing plan data to a future period as new plan data or copying actual data from one period to another as plan data.

Q52. What Is The Recommended Planning Sequence, In Co?

Ans: SAP recommends three steps in the planning. In all three steps, the planning can be carried out manually or automatically. You may use assessment, distribution, and indirect activity allocation or inputted costs for planning. You can also have centralized planning (cost element planning for all the cost centers) and decentralized planning (planning for individual cost centers) in your organization.

Q53. What Are The Two Options For Entering Plan Data?

Ans: SAP provides you with a choice of two options to enter your plan data. You may use Form-based entry or Free entry.

In form-based entry, all you need to do is fill in the plan data in the rows corresponding to the characteristic values (cost centers, cost element, etc.) displayed on the screen. But, in free entry, you have the freedom of inputting even the characteristic values.

Q54.What Are ‘distribution Keys’?

Ans: The SAP system uses ‘Distribution Keys’ to distribute planned values across various periods. With the standard distribution keys supplied by SAP, you will be able to achieve the type of distribution you need:

DK1 (equal distribution)

DK2 (distribution as done earlier)

DK5 (copy values to period where there is no value)

For example: if you have a planned annual value of 12,000, by using DK1 you will be able to distribute 1,000 each as the monthly values. If you had plan values for last year which were something like 1,000 for January to June, 500 for July, 1,500 for August, and 1,000 each for September to December, then by using DK2, you will be able to copy the same amounts to the next fiscal year. DK5 will copy values to future periods only if there are no values already available for those periods.[teaserbox type=”4″ img=”2901″ title=”Interested in Learning AWS!” 

Part 2:

Q1. – Explain the Organizational Assignment in the SAP Controlling module?

Ans. – We assign Company Codes to the Controlling area. And A controlling area to the operating concern.

Controlling Area is the umbrella under which we store all controlling activities of cost center Accounting, Product Costing, Profitability Analysis, and Profit Center.

Q2. – What are the Primary Cost Element and Secondary Cost Element?

Mark: Important SAP CO Interview Question

Ans. – We need to define every Profit and Loss GL account as a cost element in SAP that we need to control. Just as in FI General Ledger Account exists; in Controlling we have Cost Element.

We create each FI General Ledger Account as a cost element in SAP which is a Profit and Loss Account.

Primary Cost Elements are those which we create only in Controlling. This means they do not affect the Financials of the company. We use them for internal reporting only.

Further, the postings to these accounts do not affect the Profit or Loss of the company.

Internal Settlement– We use Cost Elements of this category to settle order cost to objects in controlling such as cost centers, PA segment, etc.

Order/Result Analysis– We use it to calculate WIP on the order/project.

Overhead– These we use to calculate indirect costs from cost centers to orders.

Assessment– We use assessment to calculate costs during an assessment.

Internal Activity Allocation We allocate costs during internal activity allocation such as Machine Labour etc.

Q3. – What are the Cost Objects in SAP CO?

Ans. – A cost object means a cost or a revenue collector wherein we collect all the costs or revenues for a particular cost object. Examples are cost center, production order, Internal Order, projects, Sales Order.

Thus, whenever we look at any controlling function, the basic thing we need to assess is the cost element (expense) which we want to control.

Likewise, what is the cost object ( i.e. either the production order, sales order, internal order) we are using to control this cost element?

Sounds confusing? Read it again. It is very simple.

Controlling is all about knowing the cost element what is the cost object

At the end of the period, we settle all costs or revenues in the cost object to their respective receivers as like a GL Account, Cost Center, Profitability Analysis or Asset.

Q4. – How do you relate the cost center accounting to the Profit Center?

Ans. – In the master data of the cost center, there is a provision to enter the profit center. Here, all costs which flow to the cost center are also captured in the profit center. This is to say, we create Cost centers to capture costs e.g. admin cost center, canteen cost center, etc.

Further, we create Profit Centers to capture cost and revenue for a particular plant, business unit or product line.

Q5. – What is the Cost Element Group?

Ans. – Cost Element group is nothing but a group of cost elements that help one to track and control cost more effectively. You can make many cost element groups as you feel necessary by combining various logical cost elements.

Q6. – What is a Cost Center Group?

Ans. – In a similar line, a cost center group is also a group of cost centers that help one to track and control the cost of a department more effectively. Noteworthy, we can make as many numbers cost centers as we feel necessary by combining various logical cost centers.

Certainly, we can use various combinations of the cost center groups with the cost element group to track. Hence we can control our costs per department or across departments.

Q7. – What is the difference between Distribution and Assessment?

Ans. – Distribution:- It uses the original cost element for allocating cost to the sender’s cost center. Thus, on receiving cost center, we can see the original cost element from the sender cost center. Distribution only allocates the primary cost.

Assessment:- It uses assessment cost element No 43 defined above to allocate cost. Thus various costs are summarised under the single assessment cost element. Further, in the receiver cost center the original cost breakup from the sender is not available. Assessment allocates both primary as well as secondary costs.

Q8. – What are the other activities in the Cost Center?

Ans. – If we have a manufacturing set up entering Activity prices per cost center/Activity type is an important exercise undertaken in cost center accounting.

Q9. – What is an Activity Type?

Ans. – SAP activity type is the classification of activities that we produce in cost centers in a controlling area. Examples of Activity Types are Machine Hours, Labour Charges, Units Produced, Power, etc.

Q10. – What are the important terms in SAP Product Costing?

Ans. – Important Terminologies to remember in SAP Product Costing are:

Result Analysis Key- This key determines how the work in Progress is calculated.

Cost Components– The breakup of the costs which we see in the Product costing e.g.-Material Cost, Labor Cost, Overhead, etc.

Costing Sheet– We use a costing sheet to calculate the overhead in Controlling.

Costing Variant– For all manufactured products the price control recommended is the standard price. Hence, to come up with this standard price for the final goods material we need to cost this material. We can do this using the costing variant.

Q11. – What configuration settings do you maintain in costing variant?

Ans. – Since we carry out and save all cost estimates concerning a costing variant, hence the costing variant contains all the control parameters for costing.

Further, we maintain the configuration parameters for costing type, valuation variants, date control, and quantity structure control.

Noteworthy, in costing type we specify the field where we update the price in the material master. Similarly, in the valuation variant, we specify the order in which the system should go for accessing prices for the material master ( planned price, standard price, moving average price, etc).

Further, we decide which price we should consider for the activity price. And finally, how the system should select BOM and routing.

Q12. – How does SAP go about costing a product having multiple Bill of Material within it?

Ans. – Firstly, SAP first cost the lowest level product. Then it arrives at the cost and it takes and cost the next highest level and finally arrives at the cost of the final product.

Q13. – What does the concept of cost roll-up mean in product costing context?

Ans. – The purpose of the cost roll-up is to include the cost of goods manufactured of all materials in a multilevel production structure. It lies within the cost of the material located at the top of the structure.

The costs are rolled up automatically using the costing levels.

• Firstly, the system calculates the costs for the materials with the lowest costing level and then it assigns them to cost components.
• Lastly, the system costs the materials in the next highest costing level (such as semi-finished materials).

This is to say, that the costs for the materials cost first are rolled up and then they become part of the material costs of the next highest level.

Q14. – What is a settlement profile and why you need it?

Ans. – All the costs or revenues which the system collects in the production order or Sales Order, have to settle to a receiver at the end of the period. This receiver could be a GL account, cost center, profitability analysis or asset.

Subsequently, to settle the costs of the production order or sales order, we need a settlement profile.

In a settlement profile, we define a range of control parameters for settlement. We must define the settlement profile before we can enter a settlement rule for a sender.

noteworthy, the system maintains the settlement profile in the Order Type and defaults during creation of order.

Settlement Profile includes:

1. The retention period for settlement documents
2. Valid receivers GL account, sales order, cost objects, order items, business process
3. Document Type is attached here
4. Whether 100% validation,% settlement, equivalence numbers, variances to costing based CO-PA
5. The system attaches the Allocation structure and PA transfer structure to the settlement profile E.g. A1.

Part 3:

Profitability Analysis (CO-PA) enables you to evaluate market segments, which can be classified according to products, customers, orders or any combination of these, or strategic business units, such as sales organizations or business areas, with respect to your company’s profit or contribution margin.

1)The Organizational Assignment In The Pa Module?

Ans:

• The operating Concern is the highest node in Profitability Analysis.
• The operating concern is assigned to the Controlling Area.
• Within the operating concern all the transactions of Profitability Analysis are stored.
• The operating concern is nothing but a nomenclature for defining the highest node in PA.

2) What Do You Mean By Period Based Accounting (gl Based) And Cost Of Sales Accounting (copa Based)? Period Based Accounting?

Ans:

• “Period based” means that during the month or period, all and only actual events / transactions are posted in the appropriate period.  At the end of the period estimated accruals and deferrals are made and posted to that posting period to give a more accurate view of profit.  IE any expected revenues and expenditures that should relate to the current period are accrued for and equally any prepaid expenses or revenues are deferred to the next period. 
• (Accruals and Deferrals are posted temporarily, usually to special accounts, and reversed prior to the next period end.)
• Cost of Sales Accounting:
• Cost of Sales in SAP means that we attempt to record or rather report the “costs of sales” against the actual sale at as low a level as possible and during the period. (In CO-PA this is down to a transaction level.)   This enables the company to get a reasonably accurate view of profitability on a real time basis.
• This is done by using either standards or estimates for many of the components that make up the “cost of goods sold”.  Any variations from the standards are usually posted through to the cost of sales system either at month end or when they occur.

 3) What Are Non-fixed Characteristics Or User Defined Characteristics?

Ans:

• Up to 50 non-fixed characteristics can be added to an operating concern.
• Create -> Derived the value from Table PAPARTNER (SD partner that can be used in COPA) -> Create user defined characteristic name WW008 -> Save

4) What Is A “value Field” In The Co-pa Module?

Ans:

Value fields are number/value related fields in profitability analysis such as quantity, sales revenue, and discount value.

5)What Is A “characteristic Field” In The Co-pa Module?

Ans:

Characteristics are analytical information fields used in CO-PA. Typical examples include customer number, brand, and distribution channel.

6) What Do You Mean Fixed Characteristic Fields?

Ans:

Predefined characteristic fields in SAP R/3 system, which are obvious, are known as fixed characteristic fields such as product, sales org and customer

7) What Do You Mean By Value Field Groups?

Ans:

Value Field Groups represent the possible combinations of value fields in an operating concern.
Value field groups are used to specify:

• Which value should be made available to users entering or displaying a line item
• In what order these value fields should be displayed
• Which specific value fields can be filled

8)Describe Three Ways Of Disposing Of An Asset From A Company Code In Sap R/3?

Ans:

An existing asset can be scrapped (transaction ABAVN), transferred to another company code (ABUMN), sold to a customer account in the accounts receivable module (F-92), sold with revenue but the revenue is booked to a GL account (ABAON).

9) What Is The Basic Difference In Customizing In Profitability Analysis As Compared To Other Modules?

Ans:

In PA when we configure the system i.e. creating operating concern, maintain structures no customizing request is generated. The configuration needs to be transported through a different transaction called as KE3I.

10) How Do You Configure The Assignment Of Variances From Product Costing To Copa Module?

Ans:

The variance categories from product costing along with cost element are to be assigned to the value fields in COPA.

11)What Are Statistical Key Figures In Co?

Ans:

SKF’s are statistical (or information values) used in cost allocations such as assessments and distributions.

12)What Are Account Assignment Models?

Ans:

AAM’s are blocks of document line items that can be used repeatedly to prevent manual re-entry. Which fields are included in the AAM layout can be configured using O7E3

13) How Data Flows From Sd To Copa?

Ans:

The normal SD document flow is as follows:

• Sales order
• Delivery (the delivery creates the goods issue, which debits COGS and credits Inventory – COGS is updated in CO-PA at this time)
• Billing Document (the billing document updates A/R, Sales revenue, Discounts, Freight, etc.)

14) What Are Statistical Internal Orders?

Ans:

Statistical real internal orders are dummy cost objects used for analysis and reporting purposes. They must be posted to in conjunction with a real cost object such as a cost center.

15) What Is The Difference Between “costing Based” (cb) And “account Based” (ab) Co-pa ?

Ans:

• AB can easily be reconciled with FI at account level through the use of cost elements. In CB can only be reconciled at account group level (such as revenues, sales deductions etc) as values are stored in “value fields” as opposed to accounts.
• In CB data is stored by posting periods and weeks. In AB storage is only by periods.
• In CB transactions can be stored in operating concern currency and company code currency. In AB transactions are stored in controlling area currency, company code currency and transaction currency.
• In CB you can create cross controlling area evaluations or cross controlling area plans. In AB you cannot as the chart of accounts may differ.
• In CB the cost of good sales (COGS) are updated via material price valuations. Stock change values can be transferred to CB COPA during billing. Timing differences can occur if the goods issue and billing documents are in different posting periods. In AB the value posted in the stock change is posted simultaneously to COPA.

16)Name Some Settlement Receivers For Co Internal Orders?

Ans:

• Other internal orders
• Fixed assets (including assets under constructions)
• GL Accounts
• Cost Centres

17)Can Both Account Based And Costing Based Profitability Analysis Be Configured At The Same Time?

Ans:

Yes. It is possible to configure both types of costing based profitability analysis at the same time.

18)  Why Does Sap Talk About Statistical Assignments In Co – Why Are These Different From Real Cost Accounting Assignments?

Ans:

• The reason is to facilitate reconciliation between FI and CO. The sum of all ‘real’ assignments in CO should add up to the sum of all expense and revenue postings (where cost/revenue elements have been created for the GL account of course) in FI.
•  A normal expense invoice posting to expense accounts / cost elements will be a ‘real’ posting. If the system is displaying an error message insisting on a ‘cost accounting assignment’ and you think you have entered one, then possibly you have specified a statistical assignment.
• A common error is in thinking that the business area will do – Business areas are FI elements not CO elements.

19)  How Data Flows From Co To Copa?

Ans:

hrough Assessments. Allocates costs from cost centers to profitability segments. 

20)  How Data Flows Through Mm Into Fi?

Ans:

Through Account assignment model OKB9. Automatic postings created in materials management, can be passed on to CO-PA by means of automatic account assignment to a profitability segment.

Top of Form

Bottom of Form

21) How Data Flows From Pp Into Fi & Copa?

Ans:

• Through Production Variances. It Posts variances from the production (product cost) estimates or standards to the GL accounts and to Profitability Analysis if real costs are required (vs standard costs). 
• Standard cost figures would have been used to update Stock and Cost of Goods sold figures when finished stock was issued from the production runs. 

22) What Are Characteristics Values?

Ans:

• Characteristics are aspects on which we want to break down the profit logically such as customer, region product, sales person etc. 

23)WHAT ARE THE DIFFERENCES BETWEEN PROFIT CENTER ACCOUNTING (PCA) AND PROFITABILITY ANALYSIS (CO-PA)?

Ans:

Period based Accounting 

• “Period based” means that during the month or period, all and only actual events / transactions are posted in the appropriate period.  At the end of the period estimated accruals and deferrals are made and posted to that posting period to give a more accurate view of profit.  IE any expected revenues and expenditures that should relate to the current period are accrued for and equally any prepaid expenses or revenues are deferred to the next period.
•   (Accruals and Deferrals are posted temporarily, usually to special accounts, and reversed prior to the next period end.)
• These accruals and deferrals are usually done at a fairly high level of summarization (eg: at company or business area).  The FI Ledgers and financial statements etc are always period based.

Cost of Sales Accounting

• Cost of Sales in SAP means that we attempt to record or rather report the “costs of sales” against the actual sale at as low a level as possible and during the period. (In CO-PA this is down to a transaction level.)   This enables the company to get a reasonably accurate view of profitability on a real time basis.
• This is done by using either standards or estimates for many of the components that make up the “cost of goods sold”.  Any variations from the standards are usually posted through to the cost of sales system either at month end or when they occur.
• For example: A product cost estimate might be used to calculate and post a manufactured cost through to CO-PA when every sale goes through.  The actual production orders variances from the product cost estimate can then be settled to a separate line in CO-PA. This has the benefits that
• a reasonably accurate gross profit could be reported in real time at a transaction level and of course therefore at all the characteristic levels in CO-PA.
• The impact of any abnormal variances in production can quite clearly be seen and analyzed separately from the normal profitability of a product.

24) What is ‘Cost Object’?

Ans:

• ‘Cost Object,’ also known as a CO Account Assignment Object, in SAP denotes a unit to which you can assign objects. It is something like a repository in which you collect costs, and, if necessary, move the costs from one object to another. All the components of CO have their own cost objects such as cost centres, internal orders, etc.
• The cost objects decide the nature of postings as to whether they are real postings or statistical postings. All the objects that are identified as statistical postings are not considered cost objects (for example, profit centres).

25)What is ‘Cost Element’?

Ans:

• ‘Cost Elements’ represent the origin of costs. There are two types of cost elements:
• Primary Cost Elements
• Secondary Cost Elements

26)Why do You Need ‘Cost Element Accounting’?

Ans:

Cost Element Accounting’ (CO-OM-CEL) helps you to classify costs/revenues posted to CO. It also provides you the ability to reconcile the costs between FI and CO. CO-OM-CEL provides the structure for assignment of CO data in the form of cost/revenue carriers called cost elements or revenue elements.

27) Explain Cost Center Accounting?

Ans:

‘Cost Center Accounting’ deals with the difficult task of managing ‘overheads’ within your organization. Since overhead costs are something that you cannot directly associate with a product or service, which can be difficult to control, cost centre accounting provides you with the necessary tools to achieve this.

28) What is ‘Activity-Based Costing’?

Ans:

‘Activity-Based Costing,’ popularly known as ABC, helps you to view overhead costs from the point of business processes. The result is you will be able to optimize costs for the entire business process. As a single business process, activity-based costing will cut across several cost centres and will give you an enhanced view of the costs incurred.

29) What is ‘Product Cost Controlling’ (CO-PC)?

Ans:

• ‘Product Cost Controlling’ (CO-PC) deals with estimating the costs to produce a product/service. CO-PC is divided into two major areas:
• Cost of materials
• Cost of processing
• With CO-PC, you can calculate:
• Cost of goods manufactured (COGM)
• Cost of goods sold (COGS)
• CO-PC is tightly integrated with Production Planning (PP) and Materials Management (MM), in addition to FI. The functionality helps to:
• Calculate Standard Costs of manufactured goods
• Calculate the Work-in-Progress (WIP)
• Calculate the Variances, at period-end
• Finalize settlement of product costs
• Note that CO-PC deals only with production costs as it deals only with the production.

30)What is ‘Profitability Analysis’ (CO-PA)?

Ans:

‘Profitability Analysis’ (CO-PA) helps you determine how profitable (denoted by the ‘contribution margin’) your market segments are. The analysis is on the external side of the market. You will be able to define what segments, such as customer, product, geography, sales organization, etc., of the market are required for analyzing ‘operating results/profits.’ With multi-dimensional ‘drill-down’ capability, you have all the flexibility you need for reporting.

31)How is ‘Profit Center Accounting’ (EC-PCA) Different from CO-PA?

Ans:

Unlike CO-PA where the focus is on external market segments’ profitability, ‘Profit Center Accounting’ (EC-PCA) focuses on profitability of internal areas (profit centers) of the enterprise. Profit center accounting is used to draw internal balance sheets and profit & loss statements. You may use EC-PCA in place of business area accounting.

Both CO-PA and EC-PCA serve different purposes and are not mutually exclusive. You may need them both in your organization.

32) Explain ‘Integration of CO’ with its Components and Other SAP Modules?

Ans:

• The CO module is integrated with FI, AA, SD, MM, PP, and HR:
• FI is the main source of data for CO. All expenses, posted in FI, flow to CO through the ‘primary cost elements’ to the appropriate ‘cost centers.’ Similarly, postings in Asset Accounting (such as depreciation) are also passed on to CO.
• Revenue postings in FI would result in postings in CO-PA and also in EC-PCA.
• The SD, MM, and PP modules have many integration points in CO. Goods issue (GI) to a controlling object or goods receipt (GR) from a ‘production order’ are some examples of integration. These modules are tightly integrated as consumption activities, cost of goods issued, overhead charges, material costs, etc., which are passed on to production objects such as PP production order or sales order. The WIP (Work-in-Progress) and the variances, at period ends, are settled to CO-PA, CO-PCA, and also to FI. Revenues are directly posted when you generate billing documents in SD if the sales order is a cost object item.
• The HR module generates various types of costs to be posted in CO. Planned HR costs can also be passed on for CO planning.

33)What is ‘Primary Cost Element’?

Ans:

• ‘Primary Cost Elements’ represent the consumption of production factors such as raw materials, human resources, utilities, etc. Primary cost elements have their corresponding GL accounts in FI. All the expense/revenue accounts in FI correspond to the primary cost elements in CO. Before you can create the primary cost elements in CO, you first need to create them in FI as GL accounts.
• Note that SAP treats revenue elements also as primary cost elements in CO processing. The only difference is that all the revenue elements are identified with a negative sign while posting in CO. The revenue elements correspond to the revenue accounts in FI and they fall under the cost element category, category 01/11.

34)What is the ‘Secondary Cost Element’?

Ans:

‘Secondary Cost Elements’ represent the consumption of production factors provided internally by the enterprise itself and are present only in the CO. They are actually like cost carriers and are used in allocations and settlements in CO. While creating these elements, you need to mention the cost element category, which can be any of the following:

• Category 21, used in internal settlements
• Category 42, used in assessments
• Category 43, used in internal activity allocation

35) What is ‘Cost Element Category’?

Ans:

All the cost elements need to be assigned to a ‘Cost Element Category,’ to determine the transactions for which you can use the cost elements.

Example:

• Category 01, known as the ‘general primary cost elements,’ is used in standard primary postings from FI or MM into CO.
• Category 22 is used to settle order/project costs, or cost object costs to objects outside of CO (such as assets, materials, GL accounts, etc.).

36) Differentiate Between ‘Real’ and ‘Statistical Postings’ in CO?

Ans:

The CO account assignment objects decide the type of postings allowed. They can be real or statistical postings.

• ‘Real Postings’ allow you to further allocate/settle those costs to any other cost object in CO, either as ‘senders’ or as ‘receivers.’ The objects that are allowed to have real postings include:
• Cost Centers
• Internal Orders (Real)
• Projects (Real)
• Networks
• Profitability Segments
• PP—Production Orders (make-to-order)
• ‘Statistical Postings,’ on the other hand, are only for information purposes. You will not be able to further allocate/settle these statistical costs to other cost objects. Examples of such objects include:
• Statistical (Internal) Orders
• Statistical Projects
• Profit Centers

37) How do You Define ‘Number Ranges’ in CO?

Ans:

• You will be required to define, for each of the controlling areas, the ‘Number Ranges’ for all transactions that will generate documents in CO. Once done for a controlling area, you may copy from one controlling area to other controlling areas when you have more than one such area.
• To avoid too many documents, SAP recommends grouping multiple but similar transactions and then assigning number ranges to this group. Further, you may create different number ranges for plan and actual data. As in FI, the number ranges can be internal or external. The document number ranges in CO are independent of fiscal years.

38). How Does ‘Master Data’ Differ from ‘Transaction Data’ in CO?

Ans:

• The ‘Master Data’ remains unchanged over a long period, whereas ‘Transaction Data’ are short-term. The transaction data are assigned to the master data.
• Though you normally create the master data from transactions, note that you will be able to create these records from the configuration side as well. When you need to create a large number of master data, you may use the ‘collective processing’ option to create related master records in one step. SAP puts master data in ‘groups’ for easy maintenance.
• In the case of master data of cost center/cost elements/activity types, once they are created, you will not be able to change the date. SAP calls this feature the ‘time dependency’ of master data. If necessary, you can extend the ‘time’ by creating a new one and attaching it to the existing objects. In the case of resources, the master data are time-dependent and the system will allow you to delete these objects. Statistical Key Figures (SKF) are not time-dependent; once defined they are available in the system forever.

39)How do you Automatically Create ‘Cost Elements’?

Ans:

• You will be able to create ‘cost elements’ automatically by specifying the cost element, the cost element interval, and the cost element category for the cost elements. All these are achieved by creating default settings. The creation of cost elements is done in the background.
• The primary cost elements can be created only when you have the corresponding GL accounts in the chart of accounts of the Company Code. Even though the GL account names are used as the names of the primary cost elements thus created by the system, you have the option of changing these names in CO. All the secondary cost elements are created in CO; the name of these cost elements comes from the cost element category.

40)Explain ‘Controlling (CO)’ in SAP?

Ans:

• SAP calls managerial accounting ‘Controlling’ and the module is commonly known as ‘CO.’ The CO module is, thus, primarily oriented towards managing and reporting cost/revenue and is mainly used in ‘internal’ decision-making. As with any other module, this module also has configuration set-up and application functionality.
• The controlling module focuses on internal users and helps management by providing reports on cost centers, profit centers, contribution margins and profitability, etc.

41) What are the Important ‘Organizational Elements of CO’?

Ans:

• The important organizational structure of controlling includes:
• Operating Concern (the top-most reporting level for profitability analysis and sales and marketing controlling).
• Controlling Area (central organization in ‘controlling,’ structuring internal accounting operations).
• Cost Centers (lower-most organizational units where costs are incurred and transferred).

42)What is the ‘Controlling Area’? How is it Related to a Company Code?

Ans:

A ‘Controlling Area’ is the central organizational structure in ‘controlling’ (CO) and is used in cost accounting. The controlling area, as in the case of a Company Code, is a self-contained cost accounting entity for internal reporting purposes. The controlling area is assigned to one or more Company Codes to ensure that the necessary transactions, posted in FI, are transferred to controlling for cost accounting processing.

• One controlling area can be assigned one or more Company Codes.
• One chart of accounts can be assigned to one or more controlling areas.
• One or more controlling areas can be assigned to an operating concern.
• One Client can have one or more controlling areas.
• Outline ‘Company Code—Controlling Area’ Assignments.
• There are two types of assignments possible between the Company Code and a controlling area:
• One-to-one: Here, one Company Code corresponds to one controlling area.
• Many-to-one: More than one Company Code is assigned to a single controlling area.

43)What are the ‘Components of Controlling’?

Ans:

There are three major submodules in CO and each of these submodules has many components as detailed below:

• Cost Element Accounting
• Cost Controlling
• Cost Center Accounting
• Internal Orders
• Activity-Based Costing
• Product Cost Controlling
• Profitability Analysis
• Profit Center Accounting

44) Explain ‘Cost Center Accounting.’?

Ans:

‘Cost Center Accounting’ deals with the difficult task of managing ‘overheads’ within your organization. Since overhead costs are something that you cannot directly associate with a product or service, which can be difficult to control, cost center accounting provides you with the necessary tools to achieve this.

45)What are the important Terminologies in Product Costing?: Results Analysis Key?

Ans:

This key determines how the Work in Progress is calculated

• Cost Components
• The break up of the costs which get reflected in the product costing eg. Material Cost, Labour Cost, Overhead etc
• Costing Sheets
• This is used to calculate the overhead in Controlling
• Costing Variant

For All manufactured products the price control recommended is Standard Price. To come up with this standard price for the finished good material this material has to be costed. This is done using Costing Variant. Further questions down below will explain this concept better.

46)What are the configuration settings maintained in the costing variant?

Ans:

• Costing variant forms the link between the application and Customizing since all cost estimates are carried out and saved with reference to accosting variant. The costing variant contains all the control parameters for costing.
• The configuration parameters are maintained for costing type, valuation variants, date control, and quantity structure control. In costing type we specify which field in the material master should be updated.
• In valuation variant we specify the following) the sequence or order the system should go about accessing prices for the material master (planned price, standard price, moving average price, etc).b) It also contains which price should be considered for activity price calculation and .c) How the system should select BOM and routing.

47) How does SAP go about costing a Product having multiple Bill of materials within it?

Ans:

SAP first costs the lowest level product, arrives at the cost and then goes and costs the next highest level and finally arrives at the cost of the final product.

48) What does the concept of cost roll-up mean in product costing context?

Ans:

• The purpose of the cost roll-up is to include the cost of goods manufactured of all materials in a multilevel production structure at the topmost level of the BOM(Bill of Material) The costs are rolled up automatically using the costing levels.
• The system first calculates the costs for the materials with the lowest costing level and assigns them to cost components.
• The materials in the next highest costing level (such as semi-finished materials) are then costed. The costs for the materials cost first are rolled up and become part of the material costs of the next highest level.

49)What is SAP COPA?

Ans:

SAP CO PA is a sub module coming under Financial controlling (CO) module in SAP. This module enables you to evaluate market segments to support internal accounting and decision-making.

50)What is the full form of COPA in SAP?

Ans:

CO Stands for Controlling and PA stands for Profitability Analysis.

51)What are the two types of COPA?

Ans:

There are mainly two types of COPA in SAP. They are Account based COPA and Costing based COPA.

52)Which method is used to calculate profits in SAP CO-PA?

Ans:

Cost-of-sales method of accounting is used to calculate profits in COPA.

53)What are the different currency types supported by COPA in SAP?

Ans:

Operating concern currency (code B0) and company code currency (code 10) are the two default types of currency codes supported by COPA.

54)What is financial accounting?

Ans:

SAP FI stands for Financial Accounting and it is one of important module of SAP ERP. It is used to store the financial data of an organization. SAP FI helps to analyze the financial condition of a company in the market. It can integrate with other SAP modules like SD, PP, SAP MM, SAP SCM etc.

55) Why do we use SAP FI?

Ans:

SAP Financials accounting module enables you to manage financial accounting data within an international framework of multiple companies, currencies, and languages. SAP FI module mainly deals with the below financial components −

• Fixed asset
• Accrual
• Cash journal
• Accounts receivable and payable
• Inventory
• Tax accounting
• General ledger
• Fast close functions
• Financial statements
• Parallel valuations
• Master data governance

56)What are the different submodules in SAP FI?

Ans:

• General Ledger
• AR/AP
• Banks
• Fixed Assets
• Travel Management
• Lease Accounting, etc.

57)What is General Ledger in Finance accounting?

Ans:

A General Ledger contains all the transaction details of a company. It acts as primary record to maintain all accounting details. Common general ledger entries are customer transactions, purchases from vendors, and internal company transactions.

58)What is a Company in SAP FI? What does it consists of?

Ans:

• A company is defined as smallest unit for which financial statements can be created in accordance with commercial legal regulations.
• In SAP FI, a company can comprise of multiple codes, however it acts as a single unit for which financial statements are available. All the company codes must use the same chart of accounts list and fiscal year however each code can have a different local currency.
• How do you manage transactions that comes from different line of business in a company?
• Business Areas are used to differentiate transactions that comes from different line of business in a company.

Example

There is a big company XYZ, which runs multiple business. Let us say it has 3 different domains like manufacturing, marketing and sales.

Now you have 2 options −

• First is to create different company codes
• And other better option is to create each of these business lines into business areas,

59)If you want to carry forward the balance from one fiscal year to next fiscal year. Which account type you should use?

Ans:

Retained Earnings Account are used to carry forward the balance from one fiscal year to next fiscal year. You can assign Retained Earning account to each Profit and loss account P&L account in the chart of accounts COA. To automatically carry forward the balance to next fiscal year you can define P&L statements as per COA and assign them to retained earning accounts.

60)What are the different steps involved in G/L posting?

Ans:

After you complete the payroll run, next is to add results to the GL accounts and this includes cost centers. GL posting includes the below steps −

• Groups together posting-relevant information from the payroll results.
• Creates summarized documents.
• Performs the relevant postings to appropriate GL accounts and cost centers.

61)What is the use of fiscal year variant? How many variants you can use?

Ans:

• It contains the number of posting periods in fiscal year and number of special periods. You can define up to 16 posting periods in a fiscal year in controlling component CO.
• You need to specify the fiscal year variant for each company code. When you create a controlling area, you also need to specify the fiscal year variant.
• The fiscal year variants of the company code and controlling area may only differ in the number of special periods used. You need to ensure that the fiscal year variants match, in other words, they may not have a time conflict.

62)What is the use of posting period variants?

Ans:

SAP FI Posting period variant is used to maintain accounting periods that are open for posting and all closed period are balanced. This is used for opening and closing period in fiscal year for posting purpose.

You can assign these posting periods to one or more company codes.

63)What is difference between field status variant and field status group?

Ans:

Field status variant will have filed status groups. Filed status group is maintained in GL account and It defines the field’s while posting to the GL.

64)What are the different account types in SAP FI? How do you identify account types?

Ans:

Posting Keys in SAP FI is used to determine Account types (A, D, K, M, and S) and also the type of posting. It is 2 digit numerical key.

Different Account Types in SAP FI −

• A = Assets
• D = Customers
• K = Vendors
• M = Materials
• S = General Ledger Account

65)Why do we use document type in business transactions?

Ans:

• Document type key is used to distinguish between different business transactions and to classify accounting documents.
• Document types key is used to determine number range for documents and account types like-asset, material, vendor, etc. for posting.